HDCraig
04-07-2009, 10:02 AM
WARNING: Use These Codes At Your Own Risk!
50PZ800E (Europe):
ON THE PLASMA DISPLAY itself, Press and Hold down the {VOL -} Button.
Press the {0} button 3 times on the Remote Control.
The Service Menu will be displayed, Power Off to Exit.
8UK / 9UK / 10UK:
Hold down the {VOL -} button ON THE PLASMA DISPLAY.
Press the {STATUS} button 3 times on the remote. (Status button is the one above the Setup button)
The Service Menu (CAT) will be displayed. (CAT = Computer Aided Test Menu)
Use the cursors keys on the remote to select a mode. (Select "SD Mode" to Check Hours*).
And press the Action key {} to access the menu.
To exit each mode, press the {R} button.
To exit the CAT menu, press the {STATUS} button.
Press {POWER} button on the Plasma to exit the service mode.
*On the MTBF (Mean Time Between Failure) parameter:
WT = How many times the unit was powered on
PT = The cumulative time in hours
3UY / 4UY / 5UY / 6UY / 7UY:
Hold down the {VOL -} button ON THE PLASMA DISPLAY.
Press the {STATUS} button 3 times on the remote. (Status button is the one below the Power button)
The Service Menu (CAT) will be displayed. (CAT = Computer Aided Test Menu)
Use the cursors keys on the remote to select a mode. (Select "SD Mode" to Check Hours*).
And press the Action key {} to access the menu.
To exit each mode, press the {R} button.
To exit the CAT menu, press the {STATUS} button.
Press {POWER} button on the Plasma to exit the service mode.
*On the MTBF (Mean Time Between Failure) parameter:
WT = How many times the unit was powered on
PT = The cumulative time in hours
more to come..~
50PZ800E (Europe):
ON THE PLASMA DISPLAY itself, Press and Hold down the {VOL -} Button.
Press the {0} button 3 times on the Remote Control.
The Service Menu will be displayed, Power Off to Exit.
8UK / 9UK / 10UK:
Hold down the {VOL -} button ON THE PLASMA DISPLAY.
Press the {STATUS} button 3 times on the remote. (Status button is the one above the Setup button)
The Service Menu (CAT) will be displayed. (CAT = Computer Aided Test Menu)
Use the cursors keys on the remote to select a mode. (Select "SD Mode" to Check Hours*).
And press the Action key {} to access the menu.
To exit each mode, press the {R} button.
To exit the CAT menu, press the {STATUS} button.
Press {POWER} button on the Plasma to exit the service mode.
*On the MTBF (Mean Time Between Failure) parameter:
WT = How many times the unit was powered on
PT = The cumulative time in hours
3UY / 4UY / 5UY / 6UY / 7UY:
Hold down the {VOL -} button ON THE PLASMA DISPLAY.
Press the {STATUS} button 3 times on the remote. (Status button is the one below the Power button)
The Service Menu (CAT) will be displayed. (CAT = Computer Aided Test Menu)
Use the cursors keys on the remote to select a mode. (Select "SD Mode" to Check Hours*).
And press the Action key {} to access the menu.
To exit each mode, press the {R} button.
To exit the CAT menu, press the {STATUS} button.
Press {POWER} button on the Plasma to exit the service mode.
*On the MTBF (Mean Time Between Failure) parameter:
WT = How many times the unit was powered on
PT = The cumulative time in hours
more to come..~