ISF-Auto Settings for Pro-151FD

[Heatwave]

Pioneer Elite 111FD ISF-Auto Settings.

I am currently using these settings on my Pro-151FD after having completed D-nice's break-in process. My color sensor is connected and therefore ISF-Auto uses both the color sensor and light sensor when applying the settings below.

I find these settings work great for Cable HD TV. They provide a bright, rich picture using Smooth cinema mode which eliminates many of the artefacts I've seen when using Advanced mode with cable tv video sources.

Picture Settings:
AV Selection: ISF-Auto
Contrast: 43
Brightness: +1
Color: +8
Tint: 0
Sharpness: -7

Pure Cinema: 3 (Smooth)
Black Level: 0 (Off)
CTI: 0 (Off)
Color Space: 2
Color Temp: 6 (Manual)

ACL: 0 (Off)
3DYC: 2 (Mid)
I-P Mode: 2
Text Optimization: 0 (Off)
Intelligent Mode: 0 (Off)
DRE Picture: 0 (Off)

Enhancer Mode: 1
Block NR: 0 (Off)
3DNR: 0 (Off)
Field NR: 0 (Off)
Mosquito NR: 0 (Off)

Power Save Mode: Off
Orbiter: Mode 2

RGB Controls
R High: -2
G High: 0
B High: +3
R Low: -1
G Low: 0
B Low: 0

Color Management
R: -1
Y: +1
G: 0
C: -1
B: +1
M: -1

Gamma
10%R -1
10%G -1
10%B -1
20%R -1
20%G -1
20%B -1
30%R -1
30%G -1
30%B -1
40%R -1
40%G -1
40%B -1
50%R -1
50%G -1
50%B -1
60%R -1
60%G -1
60%B -1
70%R -1
70%G -1
70%B -1
80%R -1
80%G -1
80%B -1
90%R -1
90%G -1
90%B -1

[nealh]

I put these on a 111FD. But I forgot that 151 and 111 are bit different in that 111FD is a more red push and 151 is generally green push. So will a color +8 be a problem on the 111.

[jmschnur]

what month/ year was your 151 made?

Joel