ControlCAL's Pioneer 9G Kuro Monitor Std AV Selections Display Profile(s) Discussion

[Turbe]

This thread is specifically for discussing ControlCAL's Pioneer 9G Kuro Monitor Standard AV Selections Display Profile(s).

----> This Display Profile will allow you to quickly enter and copy settings across multiple Standard AV Selections and Multiple Input Signals.

Display Regions Supported: All Regions.
Current 9G Monitor Profile Version: v0.1 (Requires ControlCAL v1.41).



NOTE:
This is a Premium Display Profile and requires a Registered (http://www.controlcal.com/donate.html), Professional (http://www.controlcal.com/donate.html) or Professional Plus (http://www.controlcal.com/donate.html) Activation Key.


Pioneer 9G Kuro Monitor Standard AV Selections for ControlCAL v1.41 (http://www.controlcal.com/forum/showthread.php?t=1):


http://i35.tinypic.com/2woewqb.jpg
Download ControlCAL - Contact Us (http://www.controlcal.com/forum/sendmessage.php) to obtain this Display Profile SetNorth American Region: PRO-101FD, PRO-141FD, KRP-500M, KRP-600M
European (including UK) Region: KRP-500M, KRP-600M
Australian Region: KRP500M, KRP600M


Screen Caps

PROFILE: Pioneer_9G_Monitor_Std_AV_v0.1_P1
http://i40.tinypic.com/ej8jmd.jpg

http://i40.tinypic.com/2nqcps6.jpg


PROFILE: Pioneer_9G_Monitor_Std_AV_v0.1_P2
http://i42.tinypic.com/2usjr6d.jpg

http://i40.tinypic.com/6h13rd.jpg


.

[Turbe]

Reserved

[Turbe]

Reserved

[Turbe]

Reserved

[Doug Blackburn]

Does this profile (for 600M specifically in case that makes any difference) allow setting Pure Mode luminance higher than the user menu when you select ISD-Day mode? Are the instructions posted in another thread for how to do that applicable to this profile (assuming it allows a "high luminance" Pure setting for ISF-Day)?

[Doug Blackburn]

Does this profile support 60Hz and 72Hz calibrations for the 500M/600M? Any special instructions needed to produce both calibrations? Just set video signal generator to 60Hz or 24p output (and select Pure Cinema-Advanced for 72Hz) and perform each calibration?

[Turbe]

Does this profile (for 600M specifically in case that makes any difference) allow setting Pure Mode luminance higher than the user menu when you select ISD-Day mode? Are the instructions posted in another thread for how to do that applicable to this profile (assuming it allows a "high luminance" Pure setting for ISF-Day)?

Hi Doug, :hiya:

No, the Display Profile uses ControlCAL's interface to access the Standard AV Selections. No additional functionality for those are added.

However, it does help send the adjusted/calibrated settings to multiple AV Selections/Input Signals and I have several Professionals using it (and DIYers) for this. :thumbsup:

You simply input the different signals on an Input and use SEND ALL for each type.

Of course, many like to use the Sliders during calibration vs the owner's remote. Also, several settings that are often missed (Light Sensor, Power Save etc.) are grouped for easy viewing (and adjustment) which often get missed unfortunately (requiring a revisit).

-Turbe

[Doug Blackburn]

What do you mean by "Standard AV Selections"? Do you mean there are no ISF-Day/Night modes in the 500M/600M?

Is this profile an additional charge for a calibrator who already has the Pro license?

[Turbe]

Standard AV Selections i.e. Pure.

The North American KRP-500M/600M are Pioneer Displays (not Elite). The Elite Models in North America offer the ISFccc Interface but not the Non-Elites/Pioneer Models.

Yes, the Display Profile is a new option, email me for Professional Purchase information.