KRP-500M ISFccc Settings

[management]

Ok so I'm posting some settings below.

I used Blue Only mode like the way it was suggested and man I couldn't get the color set right in the pattern until I used the tint adjustment like bodosom did. I got the blue and the white having the same amount of blue then I went ahead and adjusted cyan and magneta.

Also, things looked better with your choice of gamma setting than D-Nice's setting for the PRO-111FD. Considering I do not have any equipment as of yet.

Please let me know if I should make my own thread and post the settings there instead of in your thread.

Lastly, I don't have any reports. :(

[management]

Please do not re-post or copy to any other forum or thread.

Pioneer KRP-500M ISF-Day Settings

Picture Settings:
AV Selection: ISF-Day
Contrast: 36
Brightness: 4
Color: +9
Tint: -3 red
Sharpness: -10

Pure Cinema: 2 (Advance)
Black Level: 0 (Off)
CTI: 0 (Off)
Color Space: 2
Color Temp: 6 (Manual)

ACL: 0 (Off)
3DYC: 2 (Mid)
I-P Mode: 2
Text Optimization: 0 (Off)
Intelligent Mode: 0 (Off)
DRE Picture: 0 (Off)

Enhancer Mode: 1
Block NR: 0 (Off)
3DNR: 0 (Off)
Field NR: 0 (Off)
Mosquito NR: 0 (Off)

Power Save Mode: Off
Orbiter: Mode 2

RGB Controls
R High: -10
G High: -1
B High: 1
R Low: -3
G Low: -1
B Low: 2

Color Management
R: -1
Y: +1
G: 0
C: 0
B: +1
M: -1

Gamma
10%R 0
10%G 0
10%B 0
20%R 0
20%G 0
20%B 0
30%R 0
30%G 0
30%B 0
40%R 0
40%G 0
40%B 0
50%R 0
50%G 0
50%B 0
60%R 0
60%G 0
60%B 0
70%R 0
70%G 0
70%B 0
80%R 0
80%G 0
80%B 0
90%R 0
90%G 0
90%B 0

[management]

Please do not re-post or copy to any other forum or thread.

Pioneer KRP-500M ISF-Night Settings

Picture Settings:
AV Selection: ISF-Night
Contrast: 26
Brightness: 2
Color: +9
Tint: -3 red
Sharpness: -10

Pure Cinema: 2 (Advance)
Black Level: 0 (Off)
CTI: 0 (Off)
Color Space: 2
Color Temp: 6 (Manual)

ACL: 0 (Off)
3DYC: 2 (Mid)
I-P Mode: 2
Text Optimization: 0 (Off)
Intelligent Mode: 0 (Off)
DRE Picture: 0 (Off)

Enhancer Mode: 1
Block NR: 0 (Off)
3DNR: 0 (Off)
Field NR: 0 (Off)
Mosquito NR: 0 (Off)

Power Save Mode: Off
Orbiter: Mode 2

RGB Controls
R High: -8
G High: 1
B High: +7
R Low: 0
G Low: 0
B Low: -1

Color Management
R: +1
Y: +1
G: +1
C: 0
B: +2
M:-2

Gamma
10%R -3
10%G -3
10%B -3
20%R -3
20%G -3
20%B -3
30%R -3
30%G -3
30%B -3
40%R -3
40%G -3
40%B -3
50%R -3
50%G -3
50%B -3
60%R -3
60%G -3
60%B -3
70%R -3
70%G -3
70%B -3
80%R -3
80%G -3
80%B -3
90%R -3
90%G -3
90%B -3

[williammoore]

Are there any recommended ISF day/night settings for KRP-600m plasmas? I've had my set recently calibrated, but I feel that it's a little too bright.