KRP-600m isf settings / isfccc settings?

[whityfrd]

just skimming through the threads and see nothing for the 600m regarding isf settings. i do see 500m though. has anyone thats been patched have caibrated settings to post? thanks in advance.:)


ADMIN EDIT: whityfrd's settings posted in Post #8 (http://www.controlcal.com/forum/showpost.php?p=4541&postcount=8) below.

[Turbe]

Several 600M Owners havel completed the process, I believe a few have a Meter..

Are you interested in getting a meter and learning the process? :D

[whityfrd]

if i was looking to buy a meter from you i'd know where to go. but thanks anyways.

[Turbe]

Hopefully we will see some calibration reports and settings from some of the 600M Owners

[rolling green]

successful 600m patched here but no cal tools :(

[whityfrd]

well im patched and calibrated so ill post my settings once i view them for a few days and decide they need no further tweaking. just a forewarning. i didnt go the night/day route. i used night/day but just for two different sources. i have moderate light control on the room so i took the middle road with the contrast and its very sufficient for night and day viewing. i guess you could call it ISF-afternoon. lol i never switched viewing modes for day/night viewing because in my mind, 1. its exhausting, 2. its not necessary in my current household. so i decided to still not take that route. keep your eyes peeled.

[rolling green]

Looking forward to your settings, waiting patiently......Thanks in advance

[whityfrd]

as requested, i let these settings marinate into my eyes and after a few slight corrections i think i found a winner. No day or night as mentioned before but just one isf setting for my light controlled environment.

Controlcal Settings (ISF)

Cont. +32
Brt. +2
Shrp -15
Col. +5
Tint 0
Color Temp 6
Gamma (all points -1)

Grayscale
R-high +1
G-high 0
B-high +14
R-low -4
G-low +2
B-low -3

CMS
Red -2
Yellow +1
Green -2
Cyan -2
Blue 0
Magneta -2

all of the other points on page two of the control cal profile are pretty much generic as everyone elses settings. the screen size and pure cinema options were the only thing i changed between my devices. i would advise to evaluate your grayscale harshly with these settings as most sets differ in this department out of the box. i should know it took me three tries to get it right.

[rolling green]

thanks for posting your settings.

[venkatesh_m]

as requested, i let these settings marinate into my eyes and after a few slight corrections i think i found a winner. No day or night as mentioned before but just one isf setting for my light controlled environment.

Controlcal Settings (ISF)

Cont. +32
Brt. +2
Shrp -15
Col. +5
Tint 0
Color Temp 6
Gamma (all points -1)

Grayscale
R-high +1
G-high 0
B-high +14
R-low -4
G-low +2
B-low -3

CMS
Red -2
Yellow +1
Green -2
Cyan -2
Blue 0
Magneta -2

all of the other points on page two of the control cal profile are pretty much generic as everyone elses settings. the screen size and pure cinema options were the only thing i changed between my devices. i would advise to evaluate your grayscale harshly with these settings as most sets differ in this department out of the box. i should know it took me three tries to get it right.

whityfrd,

Question for you, what was the ftL you got on the 100% window with these settings? Were the blues showing a dip at the 90% or the 100% windows for the greyscale?

Thanks...

[whityfrd]

whityfrd,

Question for you, what was the ftL you got on the 100% window with these settings? Were the blues showing a dip at the 90% or the 100% windows for the greyscale?

Thanks...

dont know. i didnt use a meter. i used the spears and munsil disc to do a basic by eye calibration. what i got is better whites and a more accurate grayscale as opposed to the d-nice settings for pure while retaining color accuracy to the eye. i didnt know it but the d-nice settings for pure left the gray scale a little warm. a few clicks off high and low reds cleaned that up.

[sarge1976]

Does anyone else have any settings for the isf Day or Night? If so can you Please share them :please:

[ndisgii]

Nothing new out there yet? I cant believe it.... :please: share

[ndisgii]

Depression is now setting in :) . Its hard to believe that ther are no official professionally calibrated ISF settings to be had for the 600M yet. What in the heck is going on here :confused:

[robinsj]

It is hard to believe there are so many settings out there for the 500m, and none for the 600m.....

[irfan]

yep still waiting on a pro calibration report... ive ran thru it a few times with HCFR and an i1Display2Lite but the results just dont look good at all so i reset them... gamma was off, color casts, bad low end blacks, etc

[leminhq18]

Depression is now setting in :) . Its hard to believe that ther are no official professionally calibrated ISF settings to be had for the 600M yet. What in the heck is going on here :confused:

Hi ndisgii,
Remember me :). Finally found this place. Here are my KRP-600M ISFccc settings that you requested. Let me know hoe they work out on your KRP-600M.

536

537

538


Also here are my calibration reports. Did I mention that my KRP-600M is calibrated by Mr. "famous" D-nice :)




540

541

[ndisgii]

Hi ndisgii,
Remember me :). Finally found this place. Here are my KRP-600M ISFccc settings that you requested. Let me know hoe they work out on your KRP-600M.

536

537

538


Also here are my calibration reports. Did I mention that my KRP-600M is calibrated by Mr. "famous" D-nice :)




540

541

I am going to try them out ASAP. I will report back what I find on mine as soon as I get a chance. Might be this weekend, but I will definitely report my findings. Thank you, thank you, thank you :thumbsup:

[miyakoshi]

Hi ndisgii,
Remember me :). Finally found this place. Here are my KRP-600M ISFccc settings that you requested. Let me know hoe they work out on your KRP-600M.

536

537

538


Also here are my calibration reports. Did I mention that my KRP-600M is calibrated by Mr. "famous" D-nice :)




540

541

Hello,

I have a question for you... I have a Pioneer KRP-600A. For ControlCal, it's a same settings :confused: ?

Thanks

[Turbe]

No, the 600A is different.