Correct warm up and how often to calibrate Eyeone during calibration

[StevePDPC509A]

Hi all,
Just wondering when using my eyeone whats the best way to warm it up prior to using and what black surface is the best for calibrating the meter.

How often does the meter also need to be calibrated to this black surface During plasma calibration.

Thanks

Steve B

[Turbe]

:hiya:

I assume you are asking in regards to the Display 2 / Display LT...

Here you go:


Since you are using that meter, I recommend that you let it warm up on your display for at least 1 hour before attempting to take any measurements. Also make sure you are doing the initial setup of the dark measurement on a opaque black surface after the one hour warm up.
can you give me some examples of opaque black surfaces? currently i lay it on top of my black cd player. as for warming up, i leave the meter on the screen for at least 30min before calibration.

eyeone pro is too expensive. are there any other consumer level meters you can suggest if the LT isn't adequate.
Inside of a DVD case. And you need to leave it on the screen for an hour.