View Full Version : [9G] PRO-151FD Settings for 2 March 2009 Elite Pro 151FD's
kurochickensoup
10-31-2009, 10:15 AM
I managed to achieve a relatively flat gamma on them but any adjustments made to CMS to work on the color is at the expense of the gamma. Luckily the highest delta E I have is on magenta and it is only 6.8, so over 3, but at least under 10. The rest of the color's delta E's range from under 1 to 4. Please try these settings if you have a march 09 151 and post your findings. Also, if any of the pros could give me some feedback on my work I would appreciate it. I used an I1 pro and color HCFR.
Settings, TV#1:
All extra junk off.
Contrast. 37
Brightness. 0
Sharpness. -11
CMS. (don't even think about it!!!)
Color. +3
RBG.
-3
-1
+5
-2
+1
0
Gamma. All +1,0,0
Settings TV#2.
Contrast. 36
Brightness. 0
CMS. (SEE ABOVE)
Color. +3
RBG.
-1
-1
+4
-2
+1
0
Gamma. All +1,0,0
kurochickensoup
10-31-2009, 10:18 AM
Here are TV#2's graphs.
kurochickensoup
10-31-2009, 11:01 AM
Also, here is some important info for anyone with a ps3. D-nice has the display settings for these as being rbg, limited, superwhite on, and 16-235 for the kuro. This in fact causes clipping of black as the avs 709 disc will not display any bars past 18 on the brightness pattern. When I select YCC, limited, superwhite on, and auto for the kuro, the bars all appear as they should. With my settings I thought I was crushing blacks, but could not understand how as everything was as it should have been. Now, with these adjustments to the display settings on the ps3 and kuro, bars 17 through 25 flash as they should.
fashmhc
11-03-2009, 09:02 PM
Hey kurochickensoup. Is there any chance you will be posting your ISF settings? I just bought my kuro and it turns out it is the March 09 build. I'm brand new to all this calibration stuff and will be interested in learning as much as I can for the next few months. Also.....Thanks for your previous posts
kurochickensoup
11-04-2009, 02:04 PM
Hey kurochickensoup. Is there any chance you will be posting your ISF settings? I just bought my kuro and it turns out it is the March 09 build. I'm brand new to all this calibration stuff and will be interested in learning as much as I can for the next few months. Also.....Thanks for your previous posts
The settings I have posted above are for ISF day. These march 09 models are very similar (at least the ones I have), so one set of these should work for you. You will need controlcal to do this though.
Blue-J
04-10-2010, 11:20 AM
How are there different than the other 151 settings?
