View Full Version : [9G] PRO-101FD PRO-101FD ISFccc (isf Day, isf Night) and Pure Settings
Here is an update that includes ISF-Night Mode
Picture
AV Selection: Pure
Contrast : 37
Brightness : 1
Color : 4
Tint : 0
Sharpness : -12
Color Temp : Manual
Red High : -7
Green High : 0
Blue High : -2
Red Low : 0
Green Low : 2
Blue Low : 3
Gamma : 2
Pure Cinema
Film Mode : Advance
Text Optimization: Off
Intelligent Mode: Off
Picture Detail
DRE Picture : Off
Black Level : Off
ACL : Off
Enhancer Mode: Hard
Color Detail
CTI: Off
Color Management
R (RED) : 0
Y (YELLOW) : 0
G (GREEN) : 0
C (CYAN) : 0
B (BLUE) : 0
M (MAGENTA): 0
Color Space : 2
Noise Reduction
3DNR : Off
Field NR : Off
Block NR : Off
Mosquito NR: Off
Other
3DYC : Middle
IP Mode : 2 (Standard)
Drive Mode : 1 (75Hz)
Game Control : Off
Blue Only Mode: Off
Power & Options
Energy Save Mode : Standard
Room Light Sensor: Off
Picture
AV Selection: ISF-Night
Contrast : 25
Brightness : 1
Color : 4
Tint : 0
Sharpness : -12
Color Temp : Manual
Red High : -7
Green High : 2
Blue High : 0
Red Low : 1
Green Low : 2
Blue Low : 2
Gamma : 3 (ISF 9 Point Gamma in use)
ISF Gamma 1 2 3 4 5 6 7 8 9
Red : -1 -1 -1 -1 -1 -1 -1 -1 -1
Green : -1 -1 -1 -1 -1 -1 -1 -1 -1
Blue : -1 -1 -1 -1 -1 -1 -1 -1 -1
ISF Gamma |1|2|3|4|5|6|7|8|9
Red |-1|-1|-1|-1|-1|-1|-1|-1|-1
Green |-1|-1|-1|-1|-1|-1|-1|-1|-1
Blue |-1|-1|-1|-1|-1|-1|-1|-1|-1
Pure Cinema
Film Mode : Advance
Text Optimization: Off
Intelligent Mode: Off
Picture Detail
DRE Picture : Off
Black Level : Off
ACL : Off
Enhancer Mode: Hard
Color Detail
CTI: Off
Color Management
R (RED) : 0
Y (YELLOW) : 0
G (GREEN) : 0
C (CYAN) : 0
B (BLUE) : 0
M (MAGENTA): 0
Color Space : 2
Noise Reduction
3DNR : Off
Field NR : Off
Block NR : Off
Mosquito NR: Off
Other
3DYC : Middle
IP Mode : 2 (Standard)
Drive Mode : 1 (75Hz)
Game Control : Off
Blue Only Mode: Off
Power & Options
Energy Save Mode : Standard
Room Light Sensor: Off
Picture
AV Selection: ISF-Day
Contrast : 34
Brightness : 1
Color : 4
Tint : 0
Sharpness : -12
Color Temp : Manual
Red High : -7
Green High : 2
Blue High : 0
Red Low : 1
Green Low : 2
Blue Low : 2
Gamma : 3 (ISF 9 Point Gamma in use)
ISF Gamma 1 2 3 4 5 6 7 8 9
Red : -1 -1 -1 -1 -1 -1 -1 -1 -1
Green : -1 -1 -1 -1 -1 -1 -1 -1 -1
Blue : -1 -1 -1 -1 -1 -1 -1 -1 -1
ISF Gamma |1|2|3|4|5|6|7|8|9
Red |-1|-1|-1|-1|-1|-1|-1|-1|-1
Green |-1|-1|-1|-1|-1|-1|-1|-1|-1
Blue |-1|-1|-1|-1|-1|-1|-1|-1|-1
Pure Cinema
Film Mode : Advance
Text Optimization: Off
Intelligent Mode: Off
Picture Detail
DRE Picture : Off
Black Level : Off
ACL : Off
Enhancer Mode: Hard
Color Detail
CTI: Off
Color Management
R (RED) : 0
Y (YELLOW) : 0
G (GREEN) : 0
C (CYAN) : 0
B (BLUE) : 0
M (MAGENTA): 0
Color Space : 2
Noise Reduction
3DNR : Off
Field NR : Off
Block NR : Off
Mosquito NR: Off
Other
3DYC : Middle
IP Mode : 2 (Standard)
Drive Mode : 1 (75Hz)
Game Control : Off
Blue Only Mode: Off
Power & Options
Energy Save Mode : Standard
Room Light Sensor: Off
Djoss
01-06-2010, 05:42 AM
Which source (player) did you use?
My source is the AVCHD DVD (AVS HD 709 patterns) on a Sony BDP-S550 Blu-ray player.
dragon4d
01-13-2010, 08:26 AM
I am new to the calibration language. Could some one please tell me what does Enhancer Mode: Hard = Mode 1? Mode 2? Mode3
Many Thanks for this post.
Tim H.
spongebob
02-16-2010, 08:13 AM
Why is your night contrast higher than the day??!!
thx
bob
Turbe
02-16-2010, 08:47 AM
His isf Night is 25, isf Day is 34... I think you are looking at his Pure (37) :oops:
:D
spongebob
02-16-2010, 09:35 AM
His isf Night is 25, isf Day is 34... I think you are looking at his Pure (37) :oops:
:D
:oops:
:D
jackal2001
03-22-2010, 07:28 AM
Thanks for these settings. I just got my 101FD and I am going to use these settings for a while. I'll go back after a few hundred hours and check them with my eye1 lt. They look really good though.
spongebob
03-22-2010, 07:52 AM
Here is an update that includes ISF-Night Mode
Picture
AV Selection: Pure
Contrast : 37
Brightness : 1
Color : 4
Tint : 0
Sharpness : -12
Color Temp : Manual
Red High : -7
Green High : 0
Blue High : -2
Red Low : 0
Green Low : 2
Blue Low : 3
Gamma : 2
Pure Cinema
Film Mode : Advance
Text Optimization: Off
Intelligent Mode: Off
Picture Detail
DRE Picture : Off
Black Level : Off
ACL : Off
Enhancer Mode: Hard
Color Detail
CTI: Off
Color Management
R (RED) : 0
Y (YELLOW) : 0
G (GREEN) : 0
C (CYAN) : 0
B (BLUE) : 0
M (MAGENTA): 0
Color Space : 2
Noise Reduction
3DNR : Off
Field NR : Off
Block NR : Off
Mosquito NR: Off
Other
3DYC : Middle
IP Mode : 2 (Standard)
Drive Mode : 1 (75Hz)
Game Control : Off
Blue Only Mode: Off
Power & Options
Energy Save Mode : Standard
Room Light Sensor: Off
Picture
AV Selection: ISF-Night
Contrast : 25
Brightness : 1
Color : 4
Tint : 0
Sharpness : -12
Color Temp : Manual
Red High : -7
Green High : 2
Blue High : 0
Red Low : 1
Green Low : 2
Blue Low : 2
Gamma : 3 (ISF 9 Point Gamma in use)
ISF Gamma 1 2 3 4 5 6 7 8 9
Red : -1 -1 -1 -1 -1 -1 -1 -1 -1
Green : -1 -1 -1 -1 -1 -1 -1 -1 -1
Blue : -1 -1 -1 -1 -1 -1 -1 -1 -1
ISF Gamma |1|2|3|4|5|6|7|8|9
Red |-1|-1|-1|-1|-1|-1|-1|-1|-1
Green |-1|-1|-1|-1|-1|-1|-1|-1|-1
Blue |-1|-1|-1|-1|-1|-1|-1|-1|-1
How did you go about adjusting the gamma settings? I have never seen anyone use these?
What FtL were you getting in Day mode?
thx
bob
Turbe
03-22-2010, 12:36 PM
Hi,
D-Nice first suggested setting all the Gamma Points to -1 (though for when you have >38-40fL).
ev666il
03-22-2010, 01:35 PM
How did you design your layout with CalMAN? I've been trying to replicate D-Nice's but user defined grids are a fixed size in v3.6 and I can't make them any bigger. Also, I can't seem to put the CalMAN logo in there :confused:
Spongebob,
You can check my report for ISF-day. I get around 48FL with the posted settings.
The 9-point gamma settings can be set with Controlcal.
Turbe,
I have since made a few more changes and I am now getting gamma of 2.2 with the 9-point settings at the default all "0"s. This is with 39FL which I find is great for both day and night.
ev666il,
I used an existing report to create my report. Just remove everything you don't like and add what you want, then save it as your own custom report.
jackal2001
03-24-2010, 09:36 AM
I have since made a few more changes and I am now getting gamma of 2.2 with the 9-point settings at the default all "0"s. This is with 39FL which I find is great for both day and night.
Is this the only change you made? Just the 9-point gamma back to all 0s?
Can you repost your Calman report if you did one?
Thanks
spongebob
03-24-2010, 09:53 AM
Spongebob,
You can check my report for ISF-day. I get around 48FL with the posted settings.
The 9-point gamma settings can be set with Controlcal.
Turbe,
I have since made a few more changes and I am now getting gamma of 2.2 with the 9-point settings at the default all "0"s. This is with 39FL which I find is great for both day and night.
What is your manufac. date?
thx
bob
my Mfg date is April 2009.
I'll post my latest report in a couple of days.
Here is the updated ISF-Night report with settings. I started from defaults and left Green High at "0". This changed gamma from my previous settings and I was able to hit 2.2 without changing the 9-point gamma from the default all "0"s. I don't feel a need for ISF-Day with my current Night settings. I get good brightness during the day and with minimal lighting, it looks great at night.
AV Selection: ISF-Night
Contrast : 28
Brightness : 0
Color : 4
Tint : 0
Sharpness : -15
Color Temp : Manual
Red High : -7
Green High : 0
Blue High : -1
Red Low : -1
Green Low : 0
Blue Low : 0
Gamma : 3 (ISF 9 Point Gamma in use)
ISF Gamma 1 2 3 4 5 6 7 8 9
Red 0 0 0 0 0 0 0 0 0
Green 0 0 0 0 0 0 0 0 0
Blue 0 0 0 0 0 0 0 0 0
Pure Cinema
Film Mode : Advance
Text Optimization: Off
Intelligent Mode: Off
Picture Detail
DRE Picture : Off
Black Level : Off
ACL : Off
Enhancer Mode: Hard
Color Detail
CTI: Off
Color Management
R (RED) : 0
Y (YELLOW) : 0
G (GREEN) : 0
C (CYAN) : 0
B (BLUE) : 0
M (MAGENTA): 0
Color Space : 2
Noise Reduction
3DNR : Off
Field NR : Off
Block NR : Off
Mosquito NR: Off
Other
3DYC : Middle
IP Mode : 2 (Standard)
Drive Mode : 1 (75Hz)
Game Control : Off
Blue Only Mode: Off
Power & Options
Energy Save Mode : Standard
Room Light Sensor: Off
Ev666il,
Attached is the custom report you asked about. You are welcome to use it as is or modify it.
Floridaman
05-15-2010, 08:43 AM
I recently had my Pro 101FD calibrated and here are the settings and reports.
ISF Night Mode
Contrast 25
Brightness 01
Sharpness -12
Color Manage R 00
Color Manage Y 02
Color Manage G 00
Color Manage C 00
Color Manage B 00
Color Manage M -2
Color +5
Tint 00
Color Temp 06
R Drive -7
G Drive 00
B Drive 07
R Cut 00
G Cut 00
B Cut 00
Gamma 1 00
Gamma 2 00
Gamma 3 -1
Gamma 4 -2(R-1)
Gamma 5 -2
Gamma 6 -1(R,0)
Gamma 7 -1
Gamma 8 00
Gamma 9 00
Black Level 01
Color Space 2 02
ACL 00
IP Mode 01
Intelligent Mode 00
Enhancer Mode 01
Block NR 00
Field NR 00
Pure Cinema 00
CTI 01
Color Temp 06
3DYC 00
Text optimization 00
DRE Picture 00
Zoom 02
3DNR 00
Mosquito NR 00
ISF Day Mode
Contrast 40
Brightness 01
Sharpness -12
Color Manage R 00
Color Manage Y 00
Color Manage G 00
Color Manage C 00
Color Manage B 00
Color Manage M -2
Color +5
Tint 00
Color Temp 06
R Drive -7
G Drive 00
B Drive 00
R Cut -1
G Cut 00
B Cut 00
Gamma 1 00
Gamma 2 00
Gamma 3 00
Gamma 4 00
Gamma 5 00
Gamma 6 00
Gamma 7 00
Gamma 8 00
Gamma 9 00
Black Level 01
Color Space 2 02
ACL 00
IP Mode 01
Intelligent Mode 00
Enhancer Mode 01
Block NR 00
Field NR 00
Pure Cinema 00
CTI 01
Color Temp 06
3DYC 00
Text optimization 00
DRE Picture 00
Zoom 02
3DNR 00
Mosquito NR 00
Blu Ray-Same as above except for two settings
Pure Cinema 02
Zoom 00
Calibration Reports:
675
676
677
678
679
680
Megalith
05-16-2010, 02:43 PM
Hmm, I wonder why there's such an inconsistency between calibrations? I guess there's just different ways to go about it?
I'm currently using the OP's Pure settings; the color balance looks great but I find that I need to drop the brightness a little to get the black levels I want. The color also seems a little saturated to me, though I think all non-ISF modes may be oversaturated.
Floridaman
05-16-2010, 03:59 PM
Hmm, I wonder why there's such an inconsistency between calibrations? I guess there's just different ways to go about it?
I'm currently using the OP's Pure settings; the color balance looks great but I find that I need to drop the brightness a little to get the black levels I want. The color also seems a little saturated to me, though I think all non-ISF modes may be oversaturated.
The reason for the differences in settings is because the day mode is calibrated with a 2.2 gamma target and the night setting is calibrated with a 2.4 gamma target.
joedemeterrules
06-02-2010, 10:48 AM
jebj,
I just applied your day/night settings yesterday except I ended up using all -1 for the 9 point gamma adjustments (I didn't read the entire thread until now). If I go back and change the night settings to all 0s, do you recommend I change the day settings to all 0s? What I should say is, have you experimented with this?
Also, I input your day settings into the ISF-auto mode with intelligence on and it definitely seems to adjust to the ISF-night mode in a dark room. Thanks for the support.
joedemeterrules,
I have found that the lower contrast settings don't require any change from the default gamma setting, however with ISF-Day, gamma is too low which is why I changed it to -1. I have also played around with ISF-Auto and it looks fairly good and does adjust to changes in room brightness. I still prefer the look of Night mode and use it all the time. I never watch the TV in a completely dark room.
