Calibration Forums
 

Go Back   Calibration Forums > DIY Calibration - Display Devices > Flat Panels - Plasma > Panasonic

Notices


Reply
 
Thread Tools Display Modes
Old 04-07-2009, 09:02 AM   #1
HDCraig
Member
Registered Supporter
 
Join Date: Apr 2008
Posts: 51
Thanks: 1
Thanked 13 Times in 5 Posts
Default Panasonic Plasmas Service Menu Access Codes

WARNING: Use These Codes At Your Own Risk!


50PZ800E (Europe):
  1. ON THE PLASMA DISPLAY itself, Press and Hold down the {VOL -} Button.
  2. Press the {0} button 3 times on the Remote Control.
  3. The Service Menu will be displayed, Power Off to Exit.


8UK / 9UK / 10UK:
  1. Hold down the {VOL -} button ON THE PLASMA DISPLAY.
  2. Press the {STATUS} button 3 times on the remote. (Status button is the one above the Setup button)
  3. The Service Menu (CAT) will be displayed. (CAT = Computer Aided Test Menu)
  4. Use the cursors keys on the remote to select a mode. (Select "SD Mode" to Check Hours*).
  5. And press the Action key {} to access the menu.
  6. To exit each mode, press the {R} button.
  7. To exit the CAT menu, press the {STATUS} button.
  8. Press {POWER} button on the Plasma to exit the service mode.
*On the MTBF (Mean Time Between Failure) parameter:
WT = How many times the unit was powered on
PT = The cumulative time in hours


3UY / 4UY / 5UY / 6UY / 7UY:
  1. Hold down the {VOL -} button ON THE PLASMA DISPLAY.
  2. Press the {STATUS} button 3 times on the remote. (Status button is the one below the Power button)
  3. The Service Menu (CAT) will be displayed. (CAT = Computer Aided Test Menu)
  4. Use the cursors keys on the remote to select a mode. (Select "SD Mode" to Check Hours*).
  5. And press the Action key {} to access the menu.
  6. To exit each mode, press the {R} button.
  7. To exit the CAT menu, press the {STATUS} button.
  8. Press {POWER} button on the Plasma to exit the service mode.
*On the MTBF (Mean Time Between Failure) parameter:
WT = How many times the unit was powered on
PT = The cumulative time in hours



more to come..~

Last edited by HDCraig; 04-07-2009 at 09:41 AM.
HDCraig is offline   Reply With Quote
Sponsored Links
Register to remove these ads. It's free!




Register to remove these ads. It's free!
Old 05-23-2012, 02:12 PM   #2
Xtrips
Junior Member
Professional Supporter
 
Join Date: Nov 2010
Location: Tel Aviv, Israel
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Hello,

A customer of mine has a Panasonic TH-P58V10 plasma display.
Apparently this reference is asian.
He's asking for a calibration.
He took snapshots of his available menus and none of them has any useful settings for a "respectable" calibration.
Before I get there, I would like to know if I will have access to a more advanced service menu.
Guys, I need your help.

Thanks
Xtrips is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Sponsored Links
, ,


All times are GMT -7. The time now is 02:36 AM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Advertisement System V2.3 By   Branden
©2008 - 2014 ControlCAL.com